# Download 2-Recognizability by prime graph of PSL (2, p 2) by Khosravi A., Khosravi B. PDF

By Khosravi A., Khosravi B.

Similar nonfiction_1 books

Racing in the Street: The Bruce Springsteen Reader

For greater than 3 many years, Bruce Springsteen’s skill to precise in phrases and track the private hopes, fears, loves, and sorrows of general americans has made him a hero to his hundreds of thousands of committed lovers. Racing on the street is the 1st finished selection of writings approximately Springsteen, that includes the main insightful, revealing, recognized, and notorious articles, interviews, studies, and different writings.

Wrightscapes - Frank Lloyd Wrights LandscapeDesigns

Here's the 1st booklet to envision the environmental panorama designs of Frank Lloyd Wright, most likely the world's most sensible identified and such a lot influential architect. WRIGHTSCAPES analyzes eighty five of his works, and can pay specific realization to website making plans, panorama layout, group scale, and nearby making plans.

Extra info for 2-Recognizability by prime graph of PSL (2, p 2)

Sample text

9%, the full-load rated speed of the motor is 1765 RPM. 2 Lb-Ft. NEMA design B motors are general purpose single speed motors suited for applications that require normal starting and running torque such as conveyors, fans, centrifugal pumps, and machine tools. 9% 25 0 D 0 10 20 30 40 50 60 70 80 90 100 % Synchronous Speed 49 Starting current is also referred to as locked rotor current, and is measured from the supply line at rated voltage and frequency with the rotor at rest. Full-load current is the current measured from the supply line at rated voltage, frequency and load with the rotor up to speed.

Using the sample 30 HP, 1765 RPM motor discussed previously, torque can be calculated by transposing the formula for horsepower. 2 Lb-Ft 1765 A graph, like the one shown below, shows the relationship between speed and torque the motor produces from the moment of start until the motor reaches full-load torque at rated speed. This graph represents a NEMA B motor. 300 275 250 225 200 175 150 125 100 75 50 25 0 0 10 20 30 40 50 60 70 80 90 100 % Synchronous Speed 46 Starting torque Starting torque (point A on the graph) is also referred to as locked rotor torque.

225 200 175 150 125 100 75 50 25 0 0 10 20 30 40 50 60 70 80 90 100 % Synchronous Speed 2 10 20 30 40 Frequency - Hz 50 60 Some applications require higher than 150% starting torque. A conveyor, for example, may require 200% rated torque for starting. If a motor is capable of 200% torque at 200% current, and the drive is capable of 200% current, then 200% motor torque is possible. Typically drives are capable of producing 150% of drive nameplate rated current for one (1) minute. If the load requires more starting torque than a drive can deliver, a drive with a higher current rating would be required.